building a wooden retaining wall nz immigration

Home / building a wooden retaining wall nz immigration

w: www.mbie.govt.nz. Tel: 64 4 472-0030. PO Box 1473, Wellington 6140, New Zealand. Determination 2014/024. Regarding the issue of a notice to fix for building work carried out to remove a retaining wall at. 107 Wharf Street, Tauranga. 1. The matter to be .... batter with a wooden buffer rail installed on the driveway approximately 300mm out from the fence (refer also ..... in the soils that make up the batter; heavy rainfall and migration of that water could cause& ...

retaining wall Guide. Before you start: Consents and Engineering. building Consent. retaining walls over 1.5m high will require a building consent from the Local Body Council. walls that carry extra load on top from traffic, nearby buildings or ... 1350. 350. 150 x 50. Round. Poles. Large walls. wall. Height. Construction. Pole. Max. Spacing. Hole depth. Hole. auger. retaining timber. retaining timber. (Length x small end diameter). 1st Layer. 2nd Layer. 750. 1.8m x 150 SED. 1200.

The building Research association of New Zealand. all How to Guides are free to download from www.carters.co.nz. How to build a garden retaining wall. Small Garden retaining walls can make a big difference to the appearance of your ... Maximum retaining wall height. 500mm. 1000mm. Minimum post embedment depth. 700mm. 1000mm. Post type: No.1 house pile H5 treated to N.Z.T.P.C specs. 125 x 125 x 1200mm 125 x 125 x 2100mm. Timber treatment (in ground contact). H5.

construction of a retaining wall does not require a building consent when it is less than 1.5 m high and 'does not support any surcharge or any load additional to the load of that ground. (for example, the load of the vehicles on a road)'. retaining walls that are over 1.5 m high and those supporting a surcharge require a building consent (see Figure 1). Regardless of whether a building consent is required, retaining walls must comply with the requirements of the New Zealand building.

retaining wall Berm. retaining wall Swale. During the design process, develop a thorough understanding of the site and determine where water will come from and how it will be properly managed. Toe Drain. Typical Drains must be vented to daylight or connected to a storm sewer system and must be protected from migration of fine material. During the building process, stage your materials so surface runoff is not directed improperly. It is also a good practice to cover the infill soils& ...

For more detailed product information, please contact us.